VT210SA

These VT210SA models are able to operate in both Variable Torque (VT) and Continuous Torque (CT) modes. This dual-capability allows a lower CT-rated, and therefore more economical, drive to be specified for VT applications. You can determine over 200 parameters to perfectly match the drive to the application, and the VT210SA range is backward compatible with it's VT210S predecessor.

Manual programming need only be executed once because up to 10 complete sets of perameters can be stored in an optional diagnostic operator. The Operator can be plugged into any VT210SA drive to download data -- a useful capability for replicating programmes on several drives, or for reconfiguring drives quickly. The Diagnostic Operator also takes away the need to refer to the manual for parameter numbers. It uses a large LCD display and parameters are displayed in English.

• Sensorless Vector Control
  
• Trip-free operation with improved current control
  
• Improved speed search function
  
• Dynamic braking (up to 7.5kW)
  
• A mixture of IPM for the lower power units and IGBT technology
  
• Switchable between Constant Torque and Variable Torque modes
  
• Three Phase 380 - 460V (200V class to order)
  
• Simplified programming features
  
• Low noise and audiable frequency skip features
  
• Automatic load-dependent torque boost Slip compensation
  
• High starting torque Application-specific options
  
• Energy saving features RS232 communications port
  
• Ground Fault protection

Optional Diagnostic Operator

• - Fits all VT210S models
  - Large scale graphical LCD display
  - Stores 10 complete inverter programs
  - Copy f
• For 200Vacility for rapid error-free duplication of inverter parameters
  - Programming in English language
  - Can be permanently mounted on inverter

Circuit Options

• Dynamic Braking (Code BG)
  

Control Options (plug-in cards):

• RELAY INTERFACE (Code R). Additional 4 relay inputs, 2 relay outputs, 2 open-collector outputs
  
• ANALOGUE INTERFACE (Code A). 15-bit resolution analogue inputs replace standard analogue inputs. Additional 4 relay inputs and 4 open-collector outputs
  
• PLC INTERFACE (Code P). Additional 16-bit parallel data input, 4 open-collector outputs
  
• CPU SERIAL INTERFACE (Code S). RS-232-C/422/485 Serial Link. Up to 32-point multi-drop, 1200-9600 baud, additional 4 open-collector outputs
  
• TRACE BACK (Code T). Enhanced diagnostic tool, records 4 analogue and 8 digital (logic) conditions. Additional 4 relay inputs, 4 open-collector outputs
  
• DEVICENET INTERFACE. Industry-standard data communications. 32 bit input and output, up to 500kbps. Additional 4 assignable open-collector outputs

Voltage Options:

• Class three-phase units, please call the Driveline or contact your local distributor

Ordering syntax

• Please specify model and options as shown: VT210SA-[Model No.]-[Circuit Code]-[Control Code] eg:
  
• VT210SA-H10-G-O Ground Fault protection - standard in Europe
  
• VT210SA-H10-BG-T Dynamic braking, ground fault protection and traceback